Terms of Use
Ni-CD & Ni-MH
The Ni-Mh and Ni-CD cells sold by JB Battery is heavily tested and has passed all international standards; however it does not mean the cells can be subject to destructive usage. In order for valid warranty, buyers must ensure that the Ni-Mh and/or Ni-CD cells and/or packs are used in and only under the following conditions:
-
Use the cells in direct guideline with the provided battery specifications from Ronda and/or JB Battery. You can download this from our Knowledge Centre.
-
The cell/pack can only operate between temperatures of 0°C – 55°C under charging status and -20°C – 55°C under discharging status.
-
The charging and discharging setting must be in accordance with the product specification.
-
Reverse charging is not acceptable.
-
Charge before use. The cell/pack are delivered in a non-fully charged state.
-
Do not charge/discharge with more than our specified current and voltage.
-
Do not short circuit the cell/pack; it may result in permanent damage to the cell/pack.
-
Do not solder directly to the cell/pack.
-
Do not dissemble the pack in any way.
-
Do not expose cell/pack to exposed weather condition on a continuous basis.
-
Do not operate at environment temperature above 40°C on a continuous basis
-
Maximum continuous case temperature of less than 50°C
-
Do not expose cell/pack to extreme temperatures (above 70°C) under any condition.
-
Do not come in contact with water and other types of liquid.
-
Must store cell/pack in cool and dry environment.
Lithium for Emergency Lighting
The Lithium cells sold by JB Battery is heavily tested and has passed all international standards; this however does not mean the cells can be subject to destructive usage. In order for this warranty to be valid, buyers must ensure that the cells and/or packs are used in and only under the following conditions:
-
All usage must be in accordance with specification or in direct consultation from Ronda and/or JB.
-
The cell/pack can only operation under temperatures of 0°C – 70°C under charging status and -20°C – 70°C under discharging status.
-
The charging and discharging setting must be in accordance with the product specification.
-
Reverse charging is not acceptable.
-
Charge before use is recommended as cell/pack are delivered in a non-fully charged state
-
Do not charge/discharge with more than our specified current and voltage.
-
Do not short circuit the cell/pack; it may result in permanent damage to the cell/pack.
-
Do not solder directly to the cell/pack.
-
Do not dissemble the pack in any way.
-
Do not expose cell/pack to exposed weather condition on a continuous basis.
-
Do not allow the temperature to be above 60°C on a continuous basis.
-
Do not expose cell/pack to extreme temperatures (above 70°C) under any condition.
-
Do not come in contact with water and other types of liquid.
-
Must store cell/pack in cool and dry environment.
-
Long period of storage is acceptable as batteries have very low close to zero self-discharge.